Insights & Knowledge Center
Maintenance Guidelines
6 Signs Your Hydrant Pipework Needs Repair
Jockey pump cycling often, falling pressure or damp patches? Your hydrant pipework may need attention.
4 min read · 03 Nov 2026 · Tim Teknis Jaslindo
Hydrant pipework is often buried or hidden, so damage tends to show only when the system is tested. Watch for these signs.
Warning signs
- Jockey pump cycling too often: the classic sign of a leak in the network.
- Static pressure keeps falling with no water being drawn.
- Seepage, puddles or wet ground along buried pipe routes.
- Rust and flaking on pipes, flanges and welded joints.
- Valves hard to operate or leaking at the stem.
- Unusual vibration or noise when pumps run.
What is usually done
A technician traces the leak, assesses pipe condition, and decides between a local repair, segment replacement or full pipeline rejuvenation. After welding, a pressure test confirms the joints are tight.
Don't wait
Small leaks make pumps work harder and accelerate wear. Early repair is almost always cheaper.
Need help with your fire protection system?
